[. . . ] Unfold the attached stand to its extended position and push the POWER button on the top of the digital picture frame. Insert a memory card or USB storage device (external memory) containing desired photos, music, and/or video into the appropriate card slot or USB port as illustrated below. Note: Memory cards and USB storage devices must be orientated correctly. Generally, labels on these cards or USB devices must be facing outward as illustrated below. [. . . ] From external memory device: Insert external memory device with desired content into the appropriate connector. Follow the on screen prompts as illustrated below to copy the photo onto the frame's internal memory. NOTE: Only one photo/picture can be copied (or deleted) at a time from or to external memory devices. Select the desired audio file and repeat the copy process as previously illustrated. If desired, content can be copied onto external memory devices from the internal memory. Select the internal memory source and repeat the copy process but select the desired external memory device as the memory destination location. From a PC/notebook: For the first connection, it is recommended to remove all external memory sources. Power on the HP Digital Picture Frame and connect the HP Digital Picture Frame to your WindowsTM 2000 (with service pack 4 or greater), WindowsTM XP (with Service Pack 2 or greater), or WindowsTM Vista PC/notebook by using the USB cable provide with product (see illustration below): 3 new drive letters will appear in Windows Explorer. These new drive letters represent the Digital Picture Frame's internal memory, Memory card slot 1 and Memory card slot 2. 1 of the 3 new drive letters is the HP Digital Picture Frame's internal memory and will be labeled HP df800. Use standard WindowsTM copy and paste procedures to move content onto the frame's internal memory. To check the picture frame's available memory, right click on the internal memory drive letter and select Properties. Removing content from memory: Content can be removed/ deleted from internal and external memory in the same manner as it was added. Slide show modes Slide show mode will begin automatically a few seconds after the frame is powered on or when an external memory card/USB Flash drive is inserted. There are two slide show modes, one with background music and the other without. Review the Initial Setup section of this document for details on how to change desired settings. "Browse mode" will be displayed on the lower right section of the screen for a few seconds. This allows forward and previous photo viewing as well as a copy/delete, rotate, and zoom options. To view photos/pictures in thumbnail mode, press the in slideshow mode or once when in browse mode. The frame will display a list of music/audio files found on the selected memory source as illustrated below. â· The default playback mode is to play from first to last track then repeat from the first track. The frame will display a list of supported video clips/files found on the selected memory source as illustrated below. [. . . ] Following procedures documented in "Photo/Music/Video Content Management" section of this document, content could be copied onto the frame's internal memory. How can I find the latest information/FAQs about my HP Digital Picture Frame?Why can't I use my WindowsTM 98 or Me system to copy content onto the frame? Why can't I use my AppleTM system to copy content onto the frame? [. . . ]